Want to use Obi110 to make local calls thru VOIP

<< < (2/3) > >>

azrobert:
1) Create a free IP Freedom account (assuming acct# 17771234567) at Callcentric
http://www.callcentric.com/products/
2) Create a sub-account 17771234567101 (extension 101)
Log into your account
Click the Extensions tab then Add New Extension
3) Add credentials for extension 101 from step 2 to Bria
Proxy: callcentric.com
UserName: 17771234567101
Password: Extn 101 PW

OBi110
Use OBi Expert to make the following changes.
This assumes you added the OBi110 to OBiTalk.

Service Providers -> ITSP Profile B  SIP -> ProxyServer: callcentric.com
Service Providers -> ITSP Profile B  SIP -> X_SpoofCallerID: Checked
Voice Services -> SP2 Service -> AuthUserName: 17771234567
Voice Services -> SP2 Service -> AuthPassword: Callcentric_PW
Voice Services -> SP2 Service -> X_ServProvProfile: B
Voice Services -> SP2 Service -> X_InboundCallRoute:
{101>17771234567:aa},{ph}
Physical Interfaces -> Line Port -> InboundCallRoute:
ph,sp2(17771234567101@in.callcentric.com)
Physical Interfaces -> Phone Port -> Primary Line: PSTN Line (default)


Dial 100 from Bria
You will be connected to the OBi110's Auto Attendant
After the prompt enter "2"
After the 2nd prompt enter the outbound number

Inbound landline calls will be routed to extn 101

This is a general OBi Expert guide:
From the OBiTalk dashboard click Edit Profile on the left column.
At the bottom of the page check "Enable Obi Expert..."
Click Submit Query.
Now you can go directly to OBi Expert from the dashboard.

Click OBi Dashboard.
On the right of your OBixxx is an icon with a red E.
Click on it to enter OBi Expert.

To navigate click on the titles with the +
Then click on a sub-title
An example click on Service Providers
Then click ITSP Profile A General
There are 2 boxes to the right of each setting
To change a setting uncheck the box under ObiTalk Setting
Then uncheck the box under Device Default
Now change the setting
After you have made all the necessary changes for that page, click Submit at the bottom of the page.
OBiTalk will download the configuration changes to the OBi and reboot it.
Wait until this process is complete before continuing to the next page.

azrobert:
Here is another method I forgot about:
http://www.obitalk.com/forum/index.php?topic=5411.0

It's a more complex setup, but uses single stage dialing and you won't use the Auto Attendant. Also, PBXes is located in Europe and might be closer to you.

Tunaman:
Thank you so much!

I cant change the values in expert mode, they are grey out.  What am I doing wrong?

Im sure its something simple

Tunaman:
Never mind. I figure it out. Thanks for everything, its working perfectly.

drgeoff:
Quote from: azrobert on April 14, 2015, 06:09:10 am

Here is another method I forgot about:
http://www.obitalk.com/forum/index.php?topic=5411.0

It's a more complex setup, but uses single stage dialing and you won't use the Auto Attendant. Also, PBXes is located in Europe and might be closer to you.



PBXes.org has more than 1 server location, including USA and Japan IIRC.

Navigation

[0] Message Index

[#] Next page

[*] Previous page