New 1032 Firmware Issue
Boykin:
I will give Merlin a try when I get home. I will upgrade one of the wifi phones back to the latest firmware and see how it goes.
Boykin:
Quote from: WelshPaul on April 22, 2015, 06:05:11 am
So far so good, no issues.
I just did a ***6 and there is a new firmware release. I pressed 1 to install the new firmware 5.0.0 (Build: 2595.1311) and everything went smoothly over WiFi.
One thing I noticed right off the bat is that my WiFi signal is stronger on this build than on the last. Was getting 3 Bars on 5.0.0 (Build: 2585.1311) but now get 4 with 5.0.0 (Build: 2595.1311).
Will leave WiFi connected and see if I get any issues with this build.
Is there any network connectivity over the Ethernet cable along with power or just power. I have one 1032 on 2959.1311 that is using wired Ethernet and power adapter. It is having no problems.
Boykin:
I am an OBiPlus premium subscriber so I can factory reset, delete from OBiTalk, add back to OBiTalk and then regen the OBiPlus scripts and my phones are reprogrammed for the most part. I have to manually setup a program key to dial voicemail and change the label on SP1.
I just wish there was a way to backup your contacts so I did not have to unplug my OBiBT and take it to each phone to download and then set the default number on each contact.
WelshPaul:
Quote from: jedilady on April 22, 2015, 11:50:01 am
Hello, "One other pet hate of mine is that the OBi1032 does not match an inbound CLI to that saved in the phonebook."
I am extremely concerned about this. I have just bought the 1032 and to display the name of a contact based on the received Caller ID is one of the most basic of funtions of any telephone whether it be mobile or static.
I do hope the above problem will be sorted out soon otherwise as far as I am concerned this product is not fit for purpose!! :'(
I have mentioned this many times in the past, it's on the to do list apparently. I will drop an email off and see if I can get an update on this.
WelshPaul:
Quote from: Boykin on April 22, 2015, 12:00:15 pm
Is there any network connectivity over the Ethernet cable along with power or just power. I have one 1032 on 2959.1311 that is using wired Ethernet and power adapter. It is having no problems.
I will connect tomorrow via mains adaptor to rule out the PoE making any difference. (actually I will do it now, that way if it's still connected in the morning I know it works)
Quote from: Boykin on April 22, 2015, 12:05:11 pm
I am an OBiPlus premium subscriber so I can factory reset, delete from OBiTalk, add back to OBiTalk and then regen the OBiPlus scripts and my phones are reprogrammed for the most part. I have to manually setup a program key to dial voicemail and change the label on SP1.
I just wish there was a way to backup your contacts so I did not have to unplug my OBiBT and take it to each phone to download and then set the default number on each contact.
I hear you, I mentioned months ago about adding a CSV upload feature to the GUI's Device Update as a bare minimum. I was told it was in the works. I would like to add and remove contacts via the phones GUI too like every other phone I own but I don't think that's going to happen.
Navigation
[0] Message Index
[#] Next page
[*] Previous page