Obi110: Forward calls with pin, but auto ring FXS port after delay
QBZappy:
srirams,
Have a look at this thread. He has a dial delay issue. Might be your solution, Read up P96-98 of the admin manual. I think you should pay close attention to the "S" value of the dial plan. If you incorporate it into your dial plan you will be able to control the number of seconds before the next call process of the dial plan. See the example in the thread below.
OBiTALK Community > General Support > Day-to-Day Use > Dialing Delay on Outgoing Calls...help!
Let us know.
QBZappy:
I read the exchange between srirams and Stewart over at http://www.dslreports.com/forum/r25389379-Equipment-Recommend-me-a-gateway-device-VOIP-FXS-FXS-
Stewart's clever approach was to do the following:
"I set up the PSTN Line section of the SPA3102 to answer immediately, no authentication, dial plan (P5<:1234@127.0.0.1>|xx.) where 1234 is the User ID for the FXS port. When you call the POTS line, dial tone plays. If you dial a number, it connects via the PSTN line VoIP account. Otherwise, after five seconds, it rings the FXS port. In real life, you'll want a dial plan that requires starting with a secret code, blocks international calls, etc. You might also change the dial tone to sound like ringback tone in the country where the device is located.
Which country is that?"
srirams,
Changing the dial tone to the ring back tone is perfect and exactly what I was looking for!
This basically gives DISA service on the ATA. Then changing the dial tone sound to a ring back tone before allowing the calling party 5 seconds to call out on the POTS line otherwise the FXS port rings. Changing the dial tone to ring back gives the impression the phone is ringing when in fact you have 5 seconds to dial out before the phone really is ringing. The unit becomes a transparent gateway in another country.
Unless I missed it, I haven't found anything in the manual which lets the Obi pick up the call without CID. The user assumes CID is not available. Can someone smarter than me explain how the Obi can reproduce this solution?
Navigation
[0] Message Index
[*] Previous page