Auto Attendent doesn't work now.

<< < (2/2)

Shiblee:
Hi,

I have given {12341234567:aa},ph in my Obi200 SP2 X_InboundCallRoute. I have selected ObiBT as primary line for aa. I have changed aa digit map to (xx.)

I can connect to aa, enter pin & dial out number. After aa try to connect, it tells invalid number or routing not available.

What to do?

OzarkEdge:
Quote from: Shiblee on June 05, 2015, 07:42:39 am

Hi,

I have given {12341234567:aa},ph in my Obi200 SP2 X_InboundCallRoute. I have selected ObiBT as primary line for aa. I have changed aa digit map to (xx.)

I can connect to aa, enter pin & dial out number. After aa try to connect, it tells invalid number or routing not available.

What to do?


You've posted in someone else's topic... you should start your own *new* topic.  :)

It sounds like you need to confirm your AA1 dial plan... digit map, outbound call route, and primary line.  The digit map should accept/pass the digits dialed to the outbound call route.  The out bound call route should accept/route the number passed to a valid trunk.  Examine these to determine what they are doing to your AA1 digits dialed.

OE

Navigation

[0] Message Index

[*] Previous page