BUG REPORT: OBI1022 AA Option 1 causes call dropped violently.

(1/1)

carlyle705:
I can't choose option 1 because the call will be dropped after I press 1.

OBI developers please response this, I have fired up and request through email a few days ago, but no feedback has been received yet.

carlyle705:
Any else has the same issue?

azrobert:
Have you made any changes to the Auto Attendant configuration? Like the DigitMap or OutboundCallRoute.

Try the following from the Auto Attendant prompt:
Enter: 2
Then enter: 0#

carlyle705:
Quote from: azrobert on May 25, 2015, 12:09:37 pm

Have you made any changes to the Auto Attendant configuration? Like the DigitMap or OutboundCallRoute.

Try the following from the Auto Attendant prompt:
Enter: 2
Then enter: 0#



Thank you so much for your reply:-)

I didn't change anything on AA.
DigiMap = ([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|<00:$1>|0|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**8(Mbt)|**9(Mpp)|(Mpli))
OutboundCallRoute = {([1-9]x?*(Mpli)):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**8:>(Mbt)):bt},{(<**9:>(Mpp)):pp},{(Mpli):pli}

I also tried what you mentioned above, when I press 0#, the call just dropped.

Thanks.

BruceFerjulian:
Unless someone here on this forum has a simple answer to your question, don't expect too much from support.

The most recent problem I had, after tutoring support on how to troubleshoot, 15 email messages later, support finally admitted that my issue was a bug. By the way it was also my last support ticket, won't make that mistake again, what a waste of time.

That was last "OCTOBER". Do you think my issue was ever solved with a firmware update, dream on.

With the exception of Obi's new toys (sip phones), you will probably never see another update to your  device.

Navigation

[0] Message Index