Call forwarding and Auto Attendant

(1/4) > >>

jc2516:
Both call forwarding and Auto Attendant are working for me, but once I dial a *72[number], the AA stops. The trusted caller's calls are forwarded as well. Now I move the AA inbound number to SP4. How can I configure the *72 forward only for SP1?

azrobert:
1st, disable forwarding with *73
Then change Star Code *72 using OBi Expert

Star Codes -> Star Code Profile A:
*72, Call Forward Unconditional SP1, coll(SP1($cfan)),set(SP1($cfa),1)

Enable forwarding on SP1 with *72

You can also manually set forwarding with OBi Expert

Voice Services -> SP1 Service
CallForwardUnconditionalEnable: Checked
CallForwardUnconditionalNumber: spx(18005551212)

Change spx to the SP number (Trunk) you want to use to forward the call.

jc2516:
It works. Thanks.

Can I set up a speed dial for call forwarding? I often dian *72[mycell]#. It works for Cisco ATAs when I set up speed dial6 to *726041234567, but doesn't work for OBI200.

azrobert:
I don't think it will work on an OBi device.
Do you only forward to your cell?

jc2516:
Quote from: azrobert on May 05, 2015, 09:40:23 am

I don't think it will work on an OBi device.
Do you only forward to your cell?

Yes, my cell is the only number I want to forward.

Navigation

[0] Message Index

[#] Next page