Call forwarding and Auto Attendant

<< < (2/4) > >>

azrobert:
Manually set only the forwarding number with OBi Expert

Voice Services -> SP1 Service
CallForwardUnconditionalEnable: Un-checked
CallForwardUnconditionalNumber: spx(18005551212)

Change the Star Code to only enable forwarding and not set the number:
*72, Call Forward Unconditional SP1, set(SP1($cfa),1)

Edit:
You set the number once.

jc2516:
Great. It works.

I added *52, Call Forward Unconditional SP1, coll(SP1($cfan)),set(SP1($cfa),1). Now I can change the default fwd number by dialing *52[newnum], and dial *72/*73 to act/deact it.

jc2516:
SP1(mycell) can only forward the SP1's number to my cell phone, not the caller's number. How can I forward the caller's number to my cell phone?

azrobert:
Are you talking about the CallerID received by your cell?
To see the original CallerID on the cell, you can't use a provider to route the call.
You have to route the call using a SIP URi.

I think you have an account with SipSorcery.
Do you have an Android or iPhone?
What providers do you have defined on your OBi?

You need to install a SIP softphone on your cell.
Register the softphone to a service like SipSorcery.
Have one SP trunk on your OBi defined as SIP.
You can setup a dummy SP trunk if you don't have a trunk defined as SIP.
Enable X_SpoofCallerID on the SIP trunk.
Service Provider -> ITSP X Profile SIP -> X_SpoofCallerID: Checked

Call Forwarding Number: spx(UserID@sipsorcery.com)

Change spx to the SP number of the SIP trunk.

Edit:
This is how to setup a dummy SIP trunk on SP2:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer: 127.0.0.1
Voice Services -> SP2 Service -> AuthUserName: anything
Voice Services -> SP2 Service -> X_RegisterEnable: unchecked
Voice Services -> SP2 Service -> X_ServProvProfile: B

Free SIP Softphones:
CSipSimple - Android
Zoiper - Android and iPhone

jc2516:
When SP4 is abc@pbxes.com, sp4(123@pbxes.com) can not send out the original number.
When SP4 is abc@sipsorcery.com, sp4(123@pbxes.com) can send out the number, even if the X_SpoofCallerID is disabled.

Can I set up the dummy trunk on VGx?

Actually, I have no Data package on my cell phone. I'm using freephoneline as my SIP trunk. Can I send the caller's number to my cell phone's name display? That is, the original caller's number shows on my cell as the name, and my freephoneline number shows on cell as the number.

Navigation

[0] Message Index

[#] Next page

[*] Previous page