News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Obitalk Obi Expert Configuration vs 192.168.0.xxx IP address

Started by jtan, May 05, 2015, 09:28:28 PM

Previous topic - Next topic

jtan

I am quite puzzled sometime when I changed the configuration through Obitalk Obi Expert Configuration the information does not get updated when I logged in directly to OBi through IP address.

I though I can use any of those two method to configure OBi200.


N7AS

You have to decide which method you prefer to use. You can't use both as any change you do locally will be overwritten by ObiTalk.

To do configuration locally go to:

System Management > Auto Provisioning > Auto Firmware Update > Method: Disabled
System Management > Auto Provisioning > ITSP Provisioning > Method: Disabled
System Management > Auto Provisioning > ObiTalk Provisioning > Method: Disabled





Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.