[HOW TO] D-Link DIR-655 setup with OBi110?
SkOrPn:
Ok, well I thought I would ask real quick on my QoS page of my router just to make sure I have this correct before my OBi arrives tomorrow. Below is what the dir655 QoS page looks like. I have read many pages on my router but stuff like auto classification gets me confused. So to make this simple, could someone please tell me if my below settings look correct? And If not, what changes I should make?
NAME: OBi110
Priority: 1
Protocol: ? I assume I set this to BOTH???
Local IP Range: The static IP of the OBI box? 0.0.0.0 to what ever the OBi is? I'm pretty sure I will get this one wrong myself, lol.
Local Port Range: 0 to 65535, unchanged?
Remote IP Range: 0.0.0.0 to 255.255.255.255, unchanged?
Remote Port Range: 0.0.0.0 to 65535, also unchanged?
Auto Classification: Isn't this a way for the router to determine what is connected to its ports and how to proceed? In other words doesn't this feature allow the router to identify that I have a ATA device attached to it OR that VoIP data is being negotiated and therefor, automatically set the proper QoS rules?
Dynamic Fragmentation: I assume this should be left unchecked since its for low uplink speeds?
SIP ALG: Already disabled on another page in the router.
DMZ: Put the static IP of the OBi in here and enable it? Right?
Is this about it for this router and OBi? Anything I am missing or forgetting?
Thank You!
SkOrPn
jimates:
I thought Obihai had a thread about D-Link routers, can't find it. It has been mentioned in at least 2 recent firmware updates about fixes for D-Link router issues.
If you are going to use Google Voice only, Sip ALG doesn't matter.
SkOrPn:
Quote from: jimates on June 06, 2011, 11:40:24 am
I thought Obihai had a thread about D-Link routers, can't find it. It has been mentioned in at least 2 recent firmware updates about fixes for D-Link router issues.
If you are going to use Google Voice only, Sip ALG doesn't matter.
Yeah I didn't think SIP ALG mattered either, but it was already disabled. I do have a SipGate account (although not sure if I will ever need it now), so I left it disabled.
SkOrPn:
Actually, won't the Sipgate number be the one I would use for E911? I mean Google Voice still does not provide 911 service.
EDIT: I just noticed that this router is on the OBi recommended router list. Thats very good news indeed. Just wish they would have posted recommended router settings, lol...
http://www.obihai.com/recommended.html
QBZappy:
SkOrPn,
Hi, I think some of the settings expose the router with more ports than is needed. I think these settings will work.
Protocol: = UDP only should work
Local Port Range: = same as the OBi in this section of the OBi web page
Service Providers>RTP>LocalPortMin
Service Providers>RTP>LocalPortMax
Remote IP Range: 255.255.255.0 (This or whatever your subnet mask is in your lan setting) Will work if you leave it as is.
Remote Port Range:
Service Providers>RTP>LocalPortMin
Service Providers>RTP>LocalPortMax
You might need GV port open 5222 UDP (Not sure about this one I have not seen anyone needing to port forward this one yet)
DMZ: Better to setup a Dyndns account rather than putting it in the DMZ. I think your router might have that ability. You do not even need a Dyndns or DMZ setup if you do not plan on connecting to the OBi from the outside.
Navigation
[0] Message Index
[#] Next page