local config with asterisk

<< < (2/2)

OzarkEdge:
Quote from: Alex01 on May 18, 2015, 03:57:14 am

I would be grateful if someone could give me instructions on either dashboard or locally.

My extension is               1001
my username is              1001abcd
my server asterisk ip is:  192.168.0.100

I will reset my device again.


Maybe this will help using the OBi local web interface:

ITSP Profile A
SIP - SIP::ProxyServer = Asterisk server IP address
Submit

SP1 Service - SIP Credentials::AuthUserName = extension ID/number
SP1 Service - SIP Credentials::AuthPassword = extension password
Submit

OE

Alex01:
Quote from: azrobert on May 18, 2015, 04:49:35 am

I believe when you manually configure (not using a wizard) a trunk, it will show as Not Configured on the dashboard. Log into the OBI using the local interface. You will be presented a Status Page. Scroll down to SP1 Status. What is the status? If it shows Registered, it is defined correctly.


Local login:  There is a question mark on to the right of 'Service Not Configured'.

Dashboard shows:
SP1    Asterisk      Retrying Register (server=0.0.0.0:5060)

Quote from: OzarkEdge on May 18, 2015, 05:37:30 am

Quote from: Alex01 on May 18, 2015, 03:57:14 am

I would be grateful if someone could give me instructions on either dashboard or locally.

My extension is               1001
my username is              1001abcd
my server asterisk ip is:  192.168.0.100

I will reset my device again.


Maybe this will help using the OBi local web interface:

ITSP Profile A
SIP - SIP::ProxyServer = Asterisk server IP address
Submit

SP1 Service - SIP Credentials::AuthUserName = extension ID/number
SP1 Service - SIP Credentials::AuthPassword = extension password
Submit

OE


After carrying out your instructions the status shows:

Status Register Failed: No Response From Server (server=192.168.0.100:5060; retrying)
PrimaryProxyServer   
SecondaryProxyServer   
CallState 0 Active Calls help

OzarkEdge:
>>Status Register Failed: No Response From Server (server=192.168.0.100:5060; retrying)

Sounds like it's not finding the server at 192.168.0.100:5060?

OE

Alex01:
Quote from: OzarkEdge on May 18, 2015, 06:13:24 am

>>Status Register Failed: No Response From Server (server=192.168.0.100:5060; retrying)

Sounds like it's not finding the server at 192.168.0.100:5060?

OE


Correct OzarkEdge! I didn't have network set correctly, totally my fault; I just plugged cable into switch instead directly into router. I feel like a bit of a donkey (insult to donkey intelligence) but it's working fine.

Thanks to all you for your help.

OzarkEdge:
You're welcome!  Now you can move on to the really hard stuff!   ;D

OE

Navigation

[0] Message Index

[*] Previous page