Firmware update for 20x series
dobah:
I did as recommended (delete the device) and now I am able to add google voice to my Obi 202. Resetting the router and voice settings wasn't enough. Thanks for the info.
OzarkEdge:
Quote from: dobah on May 29, 2015, 07:41:15 am
I did as recommended (delete the device) and now I am able to add google voice to my Obi 202. Resetting the router and voice settings wasn't enough. Thanks for the info.
Thanks for the follow-up info. From the posts around here, it feels like OBiTALK Provisioning can end in an unhealthy state. As such, I would not want to leave it enabled... why risk downing an otherwise stable working in-service OBi.
OE
Dixon:
I am also getting that loop with an Obi 200. I have 4 service providers setup. I only get the loop when I try to edit SP4 which is a Google voice. I can't do a backup of the config in Obi expert. So if I delete the 200 from Obi Talk, do I have to re-configure all SP's again?
azrobert:
You can backup the configuration locally.
Log directly into the OBi using the local interface.
Key the IP address of the OBi into a Web Browser.
Hit Enter
The UserID and default Password are both "admin".
Go to System Management -> Device Update
Under Backup Configuration check Use OBi Version
Click Backup
In OBi Expert do an Import Config to OBi Expert
Backups do not contain passwords, so you will have to re-enter them.
I don't know how this process works with GV.
Dixon:
Hey thanks azrobert!
I didn't delete the device from Obi Talk since you didn't mention it. Was I supposed to?
I followed the steps and I was able to go in to SP4 which is the only GV account. I didn't need to re-input any PW's since nothing was deleted I guess.
When I logged back in Obi Talk, I saw a FW update available. So I updated.
Successfully upgraded firmware to 3.0.1.4738
Looping again when trying to config SP4. I guess I'll ignore the FW update.
Navigation
[0] Message Index
[#] Next page
[*] Previous page