Firmware update for 20x series
Chriv:
Your welcome
chilirock:
I wanted to add my experience. I have two Obi200 devices that updated to 5897EX a couple of days ago. Both are working fine. One uses Google Voice for outbound calls and CallCentric (Free NY DID) for inbound calls. The other uses CallCentric paid service for inbound and outbound calls.
Did any else with an Obi200 notice that on the new Polycom branded local webpage the External USB Storage>File Sharing Settings and ...>File Explorer sections are no longer visible? I no longer see the "External USB Storage" section in the navigation.
I always used to set file sharing to disabled. The Device Admin guide indicates that this section applies only to Obi202, so maybe the latest firmware cleans up the navigation if it doesn't apply to Obi200's. Any thoughts?
lrosenman:
Quote from: chilirock on July 05, 2018, 10:29:58 am
I wanted to add my experience. I have two Obi200 devices that updated to 5897EX a couple of days ago. Both are working fine. One uses Google Voice for outbound calls and CallCentric (Free NY DID) for inbound calls. The other uses CallCentric paid service for inbound and outbound calls.
Did any else with an Obi200 notice that on the new Polycom branded local webpage the External USB Storage>File Sharing Settings and ...>File Explorer sections are no longer visible? I no longer see the "External USB Storage" section in the navigation.
I always used to set file sharing to disabled. The Device Admin guide indicates that this section applies only to Obi202, so maybe the latest firmware cleans up the navigation if it doesn't apply to Obi200's. Any thoughts?
I have a real Obi202, and the file explorer is gone for me as well. With Cheap NAS etc, it makes sense to discontinue the ability to do file sharing off the Obi.
FormerYooper:
OBi200 with FW 3.2.2 (Build 5897EX). Device updated to this FW a couple of days ago & had no problems .... or so I thought. This morning, tried dialing a landline number & nothing. Tried dialing another landline number & call went through OK. Tried the first landline number again where I received nothing & waited around 20 seconds, then got terrible static on line, but still no connection to dialed number. Otherwise, I have had no issues either with making or receiving calls. Just wanted to add my 2 cents & report this minor issue.
dvpatel:
Quote from: Chriv on July 04, 2018, 02:55:04 pm
I got it working.
I disabled the firmware provisioning on the Obi200 box. Then, I did the provisioning from the Obitalk Account web page.
Once it provisioned, I saw that the Obitalk device was checked on the Google Voice legacy page.
Then, it automatically updated the firmware to 3.2.2 (Build: 5897EX).
I have since disabled all provisioning on the local Obi200 box.
Google Voice is working.
Many thanks to GPz1100.
Thank you. That worked for me too. Now I am trying to downgrade once again and repeat for 2 more GV numbers.
Navigation
[0] Message Index
[#] Next page
[*] Previous page