Firmware update for 20x series
lrosenman:
Rebooted my 202 by power pull. Now on 5898EX as well.
drgeoff:
Quote from: SteveInUS on July 07, 2018, 11:29:33 am
On all my 4 OBi200's with GoogleVoice
3.2.2 (Build: 5859EX) - Works fine, no audio issues. :)
3.2.2 (Build: 5897EX) - Does not work - I do not get dial tone. ???
3.2.2 (Build: 5898EX) - Does not work - I do not get dial tone. ???
I reverted back to 3.2.2 (Build: 5859EX) but they keep updating it back to 3.2.2 (Build: 5898EX)
not sure why obihai/polycom auto deploys untested firmware and causes us pain.
even with new acquisition the trend has not changed. :'(
Please confirm that the OBis with no dial tone when running 5897 or 5898 do give dial tone again if you revert them to 5859.
DineHome:
Quote from: drgeoff on July 07, 2018, 01:02:14 pm
Please confirm that the OBis with no dial tone when running 5897 or 5898 do give dial tone again if you revert them to 5859.
This is correct. After spending many hours trying to get two different OBi200 devices to work again, the fix was to manually revert to the 5859 firmware.
drgeoff:
Quote from: DineHome on July 07, 2018, 04:33:01 pm
Quote from: drgeoff on July 07, 2018, 01:02:14 pm
Please confirm that the OBis with no dial tone when running 5897 or 5898 do give dial tone again if you revert them to 5859.
This is correct. After spending many hours trying to get two different OBi200 devices to work again, the fix was to manually revert to the 5859 firmware.
I'd like to be quite certain. Are you confirming SteveInUS's post that changing firmware between the versions he mentioned can make dial tone appear and disappear on OBi20x devices? Or are you merely saying that you had GV problems which go away when using 5859 firmware?
a1b2:
Obi200, fw 3.2.1 a few days ago stopped receiving audio. Enabled auto fw update, multiple reboots still stuck on 3.2.1.
Manually installed fw 3.2.2 5859- same issue. What worked for me:
Factory reset device from web gui. Removed device from Obi portal, added device back to portal, configured GV via portal, tested good on fw 3.2.2 5859. Device updated to 5898EX- tested good again, disabled all auto/portal updates.
Navigation
[0] Message Index
[#] Next page
[*] Previous page