Firmware update for 20x series
shap:
Obihai support pushed a new firmware to my device - but still no dial tone. Reverted back to 5859EX - all good. It seems they do not really found the root of the problem ...
Quote from: Marco99 on July 22, 2018, 01:27:49 pm
OBI200 with 5898...no Dial Tone...rebooting
Reverted to 5859...back to normal
Stach:
My Obi202 stopped working with Google Voice over the weekend and both lines say "Connect Failed: No Response". I'm guessing that this is related to a new firmware push since nothing has changed on my side and others are seeing the same (i.e. can't call or be called). Some mention about reverting back to a previous firmware version that was working fine, how do I go about getting the file if Obi doesn't post firmware, or does the device keep a copy of the last working firmware that I can revert to?
Thanks in advance for your replies.
Stach
azrobert:
Quote from: Stach on July 23, 2018, 06:40:17 am
how do I go about getting the file if Obi doesn't post firmware?
Thanks in advance for your replies.
Stach
http://www.obitalk.com/forum/index.php?topic=9983.msg91700#msg91700
chilirock:
Quote from: Stach on July 23, 2018, 06:40:17 am
My Obi202 stopped working with Google Voice over the weekend and both lines say "Connect Failed: No Response".
Same for me on Saturday morning. I noticed that the two Google Voice accounts on my Obi200 showed connect failed. Nothing changed on my side, I had been on v5898EX for several weeks. All of the sudden no connection to GV on two separate accounts. I have a CallCentric account configured on the same device and it was still connected fine even though the GV accounts were not.
I rebooted the device and everything connected and was working again. Not sure what caused GV to go off line. I should mention that other than the strange connection loss issue this past weekend, I have had no issues with v5898EX. I use GV for 100% of my outbound calls and CallCentric for 100% of inbound calls.
bill-cary:
I found a problem chasing a different issue and it may be related to this.
Looking at some of the numbers listed as not dialing, there are duplicate numbers in the sequence - like 22 or 00 etc. Toll free numbers maybe 800. The issue is, if I dial normally on a touch tone POTS I get dead air, 503 errors and other clues the call didn't go thru. If I dial very slowly - one touch per second or slower, it works fine. Duplicate numbers would lend themselves to fast dialing.
Try dialing slow and report if that "fixes" the issue.
Navigation
[0] Message Index
[#] Next page
[*] Previous page