Firmware update for 20x series
flamaest@gmail.com:
Saw this, I have not tried this yet:
""
I was able to solve this problem by adjusting my flash timing. Up until now I would go to static every time I tried to return from call waiting. I raised my HookFlashTimeMax setting from the default 900 up to 1250. I've tested it 3 times in a row now and it is working. No new power supply. Just tweaked that one setting.
Get on a web browser and head to the IP address of your OBI device. You can find and adjust this setting here: Physical Interfaces::PHONE(#) Port, then scroll down to Timers. HookFlashTimeMax is the first option under Timers.
I hope this helps everyone else. I think the problem is that many phones have Hook-Flash settings that are too close to or exceed the 900 ms allotted by the OBI200 default settings.
This only solves the OPs problem of static when switching back back to original caller after call waiting. This will not solve the issue of calls cutting out into static mid-call that are unrelated to call waiting.
""
Navigation
[0] Message Index
[*] Previous page