OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: cptndave on May 24, 2016, 09:27:03 AM

Title: Problems configuring voip.ms on Profile B/SP2 service
Post by: cptndave on May 24, 2016, 09:27:03 AM
I've followed the voip.ms setup instructions on their wiki at https://wiki.voip.ms/article/OBi_100/110_%26_OBi_200, but using ITSP Profile B and SP2 because I have Google Voice on Profile A/SP1.  I just signed up for voip.ms to bring in my home number to VOIP service.  (I don't want to bring it to GV for various reasons).  Are Profile B & SP2 inherently connected somehow or are these independent settings that need to be tied together?

No matter what I try the SP2 Service Status says "Service Not Configured

I have OBi200, hardware 1.4, software 3.1.0 (Build: 5110).  I've attached the log from boot to checking system status.  There doesn't seem to be any indication that helps with the voip.ms not working. I don't know if there should be log data indicating login attempt/success/failure.
Title: Re: Problems configuring voip.ms on Profile B/SP2 service
Post by: cptndave on May 24, 2016, 09:54:31 AM
I solved my own problem by setting X_ServProvProfile to B instead of the default of A.
syslog shows successful voip.ms login and status is Registered.