Print Page - inbound calls

Title: inbound calls
Post by: claude on December 09, 2012, 07:55:40 AM

hi !

this is my inbound on sp1 {(obi500xxxxxx|sp31514xxxxxxx):ph},{ph1,ph2}

i want to receive my calls on my obi500xxx which is ok but the sp3514xxxxxxx do not ring !
someone could help me pls ;)

Title: Re: inbound calls
Post by: hwittenb on December 09, 2012, 03:59:42 PM

If I understand correctly, you want phone 1 and phone 2 to ring on an incoming call to sp1. You also want to ring another OBi, OBi500xxxxxx, and you also want to ring 514xxxxxxx. Is this correct?

If the above is correct I believe you should have for the inbound routing:
{ph1,ph2,pp1(ob500123456),sp3(15141234567)}

Title: Re: inbound calls
Post by: claude on December 09, 2012, 04:50:30 PM

thank you very much ! it is working..
what is the pp for?

Title: Re: inbound calls
Post by: hwittenb on December 09, 2012, 06:02:41 PM

Quote from: claude on December 09, 2012, 04:50:30 PM
thank you very much ! it is working..
what is the pp for?

pp is for sending the call over OBiTalk to the named OBi adapter.

Title: Re: inbound calls
Post by: claude on December 09, 2012, 06:21:40 PM

ok thanks

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: claude on December 09, 2012, 07:55:40 AM