I see a lot of talk about Obihai devices with asterisk, but not freeswitch. Does anybody know how to, or can point me to a clear instruction set on how to do this. I am able to call out through the analog phone to either another softphone on the network, or to my cell phone through flowroute. I have accomplished this by setting up a simple extension and getting the obi to authenticate via spi/voice services.
I am not able to call the analog phone connected to the obi through a softphone registered with my freeswitch server. I have tried to set the gateway up so it does not have to authenticate. When I look at fusionpbx it claims the status is "stopped" When I try to call I get "not available please record your message" I can see via wireshark that no messages are being sent from freeswitch to the obihai302.
First, I never used Freeswitch, so I can't help with the configuration.
You just want to ring the OBi phone from Freeswitch and not use any trunk defined on the OBi. Correct?
You said:
QuoteI have accomplished this by setting up a simple extension and getting the obi to authenticate via spi/voice services.
You have the OBi setup as an extension. Simply route the call to that extension.
You only have to setup the OBi as a gateway when you want to route outbound calls to a trunk defined on the OBI.