OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: franciscoruizm@yahoo.com on June 01, 2011, 03:43:19 PM

Title: Help about configuration of 100 and 110
Post by: franciscoruizm@yahoo.com on June 01, 2011, 03:43:19 PM
The situation is:

I want use the 100 to call to a 110 and the 110 forward the call to pstn. The respective 110 port is conected to pstn.

Which will be the configuration?
Title: Re: Help about configuration of 100 and 110
Post by: RonR on June 01, 2011, 03:56:36 PM
Simply?:

Telephone -> OBi100 -> Internet -> OBi110 -> PSTN Line
Title: Re: Help about configuration of 100 and 110
Post by: RonR on June 01, 2011, 08:10:22 PM
Disclaimer: This is totally untested, so please don't shoot the messenger if there are surprises.

I think I've come up with an approach that effectively adds the LINE Port of a remote OBi110 to an OBi100.  The PrimaryLine of the OBi100 is effectively set to the remote 0Bi110 LINE Port.  Both units can still use their local SP1, SP2, and OBiTALK Services in the usual manner.  A relatively small number of changes are required:


OBi100


Physical Interfaces -> PHONE Port -> DigitMap:

([1-9]x?*(Mli)|[1-9]|[1-9][0-9]|**0|***|**1(Msp1)|**2(Msp2)|<**8:99*>(Mli)|)**9(Mpp)|<99*>(Mli))


Physical Interfaces -> PHONE Port -> OutboundCallRoute:

{([1-9]x?*(Mli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp}


User Settings -> User Defined Digit Maps -> User Defined DigitMap2:

Label : li
DigitMap : (xxxxxxxS4|1xxxxxxxxxx|xx.)


Speed Dial 99 : 290123456     (290123456 = OBi110 OBiTALK Number)



OBi110


Voice Services -> OBiTALK Service -> InboundCallRoute :

{(290654321)>(Mli):li},{(290654321):aa},{ph}     (290654321 = OBi100 OBiTALK Number)