OBiTALK Community

Firmware, Software Updates => Firmware / Advisories / Notifications for OBi Products => Topic started by: al98t on December 11, 2015, 09:48:34 AM

Title: **Help** Obi1032 Firmware Update Failed
Post by: al98t on December 11, 2015, 09:48:34 AM
I was doing firmware update on my phones from the obitalk.com website and one of my phones didnt update and is now dead.

Screen does not power up and only have a RED LED way at the top right. I have tried to unplug the phone and plug it back in. As soon as I plug it back in the LED lights up..

Is there a procedure to fix this?
Title: Re: **Help** Obi1032 Firmware Update Failed
Post by: drgeoff on December 11, 2015, 10:47:37 AM
Try http://www.obihai.com/faq/obi-ip-phone/phn-factory-reset.

See if the unit is able to get an IP address if powered up when connected to a DHCP server.  If yes, see if you can get to the phone's web server and try to do a firmware update again that way.

Otherwise I suggest http://www.obihai.com/supportTicketFormA