Today I started getting a message when I try to call that says "there is no service available to complete your call". I don't see that I need a firmware upgrade. No triangle etc. Dialing ***6 I am told software update not available. Is anyone else experiencing this? Does anyone have any advice?
Many thanks,
Don
update the firmware manually to fix this.
http://fw.obihai.com/OBi110-1-3-0-2886.fw (for Obi 100 and 110)
Pick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.
Open a web browser to that address.
Click System Management-->Device Update-->Firmware Update-->Select file to update firmware.
Browse to the file you downloaded and select it.
Click the "Update" button.
Thank you so much. All is well again in obi land.
Really appreciate your help,
Don
Hmm. i started to get this message myself today also.
Ive done the update the way that you said, and am still getting a 404 error even on the echo test, or any number that i call out.
It would be nice if this information was updated on the official firmware update page..
https://www.obitalk.com/forum/index.php?topic=9.0
What login is being asked for here? I am confused as my Obitalk login isn't working. Thanks.
Quote from: Bd59 on June 14, 2016, 12:54:33 PM
What login is being asked for here? I am confused as my Obitalk login isn't working. Thanks.
admin is the default user name and password for local web access
I have the same problem. I reset my Obi 110 and updated firmware (it said it was current and didn't update). Now my dashboard shows service not configured. I had to delete the current configuration and Press the Google Voice set up to reconfigure. Now it's working again.
Just a update and closing to my problem, which i just got it working again. Ive tried numerous times to flash with the 2886 firmware, rebooting then cold booting and i finally noticed it was staying on the old revision. I had to go into my settings and tell it not to auto check for updates, then update, and everything worked out fine.
So im finally good to go now. Worst time also since this phone is for a terminal cancer patient which today is her doctor call in for her medication and alas the phone wouldn't work (just found out last week her bone/blood cancer came back).
@guchino You shouldnt have to. Look at your status page on your obi and verify the SoftwareVersion is 1.3.0 (Build: 2886). If it isnt then you might be running into the same problem i was running into. If it is build 2886, then someone else will probably have to help (since im still clueless on alot of things for this device)
EDIT: Opps, i see you got it working while i was typing mine out, lol. All is good
Don't know if we can give kudos or points, but THANKS GeorgeObi. Your post got my line back up and running this morning. :)
Quote from: GeorgeObi on June 14, 2016, 11:58:16 AM
update the firmware manually to fix this.
http://fw.obihai.com/OBi110-1-3-0-2886.fw (for Obi 100 and 110)
Pick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.
Open a web browser to that address.
Click System Management-->Device Update-->Firmware Update-->Select file to update firmware.
Browse to the file you downloaded and select it.
Click the "Update" button.
Thank you SO much. You just saved me $10! :) I'm going to pay it forward.
Quote from: GeorgeObi on June 14, 2016, 11:58:16 AM
update the firmware manually to fix this.
http://fw.obihai.com/OBi110-1-3-0-2886.fw (for Obi 100 and 110)
Pick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.
Open a web browser to that address.
Click System Management-->Device Update-->Firmware Update-->Select file to update firmware.
Browse to the file you downloaded and select it.
Click the "Update" button.
Thank you! Had the same issue and followed these instructions and now all is well. Did not have to reconfigure anything.
Quote from: GeorgeObi on June 14, 2016, 11:58:16 AM
update the firmware manually to fix this.
http://fw.obihai.com/OBi110-1-3-0-2886.fw (for Obi 100 and 110)
Pick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.
Open a web browser to that address.
Click System Management-->Device Update-->Firmware Update-->Select file to update firmware.
Browse to the file you downloaded and select it.
Click the "Update" button.
Same issue here. Thanks for the info, it got us up and running in no time. We really appreciate it!!
admin is the default user name and password for local web access
[/quote]
No idea what this means. Trying to log in with the user name a pw I use for the Obi web site doesn't work.
Quote from: nicmart on June 23, 2016, 05:56:01 AM
admin is the default user name and password for local web access
No idea what this means. Trying to log in with the user name a pw I use for the Obi web site doesn't work.
[/quote]
It means that when you point a browser at the OBi's IP address on the LAN and are asked for username and password, they are both 'admin' (without the quotes) if they have not been changed from the default values. Your credentials for the Obitalk Dashboard and forum are not what are being asked for.
My Obi100 had some problems since a couple of weeks ago, calling-in is Ok, but when calling out, it says 'No Service Available', then I updated the firmware to be 2882, still doesn't work. Please give me the step-by-step details how to 'delete the current configuration and Press the GV set up to reconfigure', OR any other solution to fix this problem. Many thanks.
Quote from: guchino on June 14, 2016, 02:24:40 PM
I have the same problem. I reset my Obi 110 and updated firmware (it said it was current and didn't update). Now my dashboard shows service not configured. I had to delete the current configuration and Press the Google Voice set up to reconfigure. Now it's working again.
Quote from: JackL on July 12, 2016, 05:05:45 PM
My Obi100 had some problems since a couple of weeks ago, calling-in is Ok, but when calling out, it says 'No Service Available', then I updated the firmware to be 2882, still doesn't work. Please give me the step-by-step details how to 'delete the current configuration and Press the GV set up to reconfigure', OR any other solution to fix this problem. Many thanks.
http://www.obitalk.com/forum/index.php?topic=11384.0
Many thanks to Drgeoff again, Now it works!!!
_____________________________________________________________________________________________
[/quote]
Clicking on the service providers button doesn't seem to work. It's giving me the standard error as below. Does that mean obihai is forcing me to pay the $10 inspite of manually updating the firmware?
Your device may have outdated, old software which no longer complies with Google Voice security requirements.
The latest software, available through your OBiTALK account, will ensure that you can continue using Google Voice on your OBi securely. To get the latest software, please make sure your device is within its one-year warranty and support entitlement or that you have paid for extended support. Obihai support entitles you to the latest software for your OBi with automatic software updates as well as expert advice from Obihai's support team.
OBi customers may also visit: www.obitalk.com/info/support for more information including access to the OBiTALK forum.
Quote from: Sandy225 on July 15, 2016, 03:37:09 PM
Clicking on the service providers button doesn't seem to work. It's giving me the standard error as below. Does that mean obihai is forcing me to pay the $10 inspite of manually updating the firmware?
Your device may have outdated, old software which no longer complies with Google Voice security requirements.
The latest software, available through your OBiTALK account, will ensure that you can continue using Google Voice on your OBi securely. To get the latest software, please make sure your device is within its one-year warranty and support entitlement or that you have paid for extended support. Obihai support entitles you to the latest software for your OBi with automatic software updates as well as expert advice from Obihai's support team.
OBi customers may also visit: www.obitalk.com/info/support for more information including access to the OBiTALK forum.
Read and follow the instructions: http://www.obitalk.com/forum/index.php?topic=11384.0 (http://www.obitalk.com/forum/index.php?topic=11384.0)
[my OBITALK 100 dosen't work
**9 222 222 222
Good .
***1 , ***6
Don't work.
***1 , I can't get the IP from OBI100
just get " no service in you area"
Help me !!!
Lucy
Quote from: lucy1012 on August 11, 2016, 11:18:29 PM
[my OBITALK 100 dosen't work
**9 222 222 222
Good .
***1 , ***6
Don't work.
***1 , I can't get the IP from OBI100
just get " no service in you area"
Help me !!!
Lucy
Looking also at your previous posts I think your best action would be to perform a factory reset.
https://www.obitalk.com/info/faq/Troubleshooting-sec/How-to-Factory-Reset
I did it many times already. I reset it again and agin .
Anyway. ***1 can't get IP address
Your OBi is dead. Buy a new one. This time, get an OBi 200, because the OBi 100 products are being discontinued.
"my problem is I can not get IP address when I press ***1."
Why I can not get IP address after I press ***1?
Million thanks
just hear "no service in your area and log on obitalk.com "
**9 222 222 222 is working