OBiTALK Community

General Support => Day-to-Day Use => Topic started by: Yodaphone1 on June 15, 2016, 04:16:41 AM

Title: Speed Dial Problems on Obi 110
Post by: Yodaphone1 on June 15, 2016, 04:16:41 AM
I have a Obi 110 setup with 20 speed dials.

when i dial an speed dial with 1x or 2x double digit number it ignores the 2nd digit & dials the 1st digit only causing errors.

this used to work fine but this problem has cropped up recently

ANy idea why this is happenning?
Title: Re: Speed Dial Problems on Obi 110
Post by: NoelB on June 15, 2016, 04:29:38 PM
Quote from: Yodaphone1 on June 15, 2016, 04:16:41 AM
I have a Obi 110 setup with 20 speed dials.

when i dial an speed dial with 1x or 2x double digit number it ignores the 2nd digit & dials the 1st digit only causing errors.


In your phone DM add S4 so the speed dial DM becomes
|[1-9]S4|[1-9][0-9]|. This should introduce a 4 sec delay after the first digit to allow the 2nd digit to get captured.