Hi, hoping someone can assist me with where I've gone wrong in setting up my dial rules .. for some reason , all numbers dialed that begin with a '1' seem to fall through to LINE1 (PSTN) and not via SP1
Call 1 09/16/2017 12:28:41
Terminal ID PHONE1 SP1
Peer Name
Peer Number 0386959999 0386959999
Direction Outbound Outbound
12:28:41 New Call
12:28:42 Call Connected
12:28:48 End Call
Call 2 09/16/2017 12:14:49
Terminal ID PHONE1 LINE1
Peer Name
Peer Number 1900123456 1900123456
Direction Outbound Outbound
12:14:49 New Call
12:14:54 Call Connected
12:14:57 End Call
Call 3 09/16/2017 12:00:30
Terminal ID PHONE1 LINE1
Peer Name
Peer Number 1800240481 1800240481
Direction Outbound Outbound
12:00:30 New Call
12:00:35 Call Connected
12:00:38 End Call
Call 4 09/16/2017 11:45:27
Terminal ID PHONE1 SP1
Peer Name
Peer Number 0397341234 0397341234
Direction Outbound Outbound
11:45:27 New Call
11:45:37 Call Connected
11:47:12 End Call
Call 5 09/16/2017 10:55:20
Terminal ID PHONE1 SP1
Peer Name
Peer Number 001164216543210 001164216543210
Direction Outbound Outbound
10:55:20 New Call
10:55:21 End Call (404 Not Found)
Call 6 09/16/2017 09:19:16
Terminal ID PHONE1 LINE1
Peer Name
Peer Number 1800240481 1800240481
Direction Outbound Outbound
09:19:16 New Call
09:19:20 Call Connected
09:19:26 End Call
Call 7 09/16/2017 09:13:44
Terminal ID PHONE1 SP1
Peer Name
Peer Number 0412123456 0412123456
Direction Outbound Outbound
09:13:44 New Call
09:13:51 End Call
My 'Phone Port' Digit map looks like this.
((Msos)|(Mfre)|(Mlrn)|(Mspe)|(Mpre)|(Mloc)|(Mint)|(Mnat)|[1L9]x?*(Mpli)|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))
With an 'Outbound call route' , like this.
{(Msos)|(Mfre)|(Mspe)|(<##:>)|(<**70:>(Mli)):LI},{(Mloc)|(Mint)|(Mnat)|(<**1:>(Msp1)):sp1},{(<**2 :>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{([1L9]x?*(Mpli))| (<**9:>(Mpp)):PP},{**0:AA},{***:AA2},{(<**8:>(Mbt))| (<**81:>(Mbt)):bt},{(<**82:>(Mbt2)):bt2},{(Mpli):pli}
User defined digit maps are..
fre = (1800xxx xxx|180x xxx)
lrn = (1300xxx xxx|130xx xx|13[123456789]xxx)
spe = (1100|114x xxxx|119x|122x|1225|123x|124xx|125xxx|1268x|1268 xxx|1268 xxx xxx|127x.|1282|128xxx|15x.)
pre = (190x xxx xxx)
my other User Defined digit maps for local, national (incl mobiles),international, all seem to work ok.. any clues what i'm missing or where to look ?
loc = (<03>[456789]xxx xxxx)
nat = (0[23478]xxxx xxxx)
int = (0011xx.)
You are routing (Mfre) to the Line port, so that explains 1800 numbers. I don't see where you are referencing (Mpre) or (Mirn) in the outbound route. What is your Primary Line and what does your Line DigitMap look like? The default Primary Line for an OBi110 is the Line Port. {(Mpli):pli} will route any number that matches the Primary Line's DigitMap to the Primary Line.
Primary Line is set to PSTN Line..
Ahh.. my Outbound call route should be changed to something like this ?
{(Msos)|(Mspe)|(<##:>)|(<**70:>(Mli)):LI},{(Mloc)|(Mint)|(Mnat)|(Mfre)|(Mpre)|(Mlrn)|(<**1:>(Msp1)):sp1},{(<**2 :>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{([1L9]x?*(Mpli))| (<**9:>(Mpp)):PP},{**0:AA},{***:AA2},{(<**8:>(Mbt))| (<**81:>(Mbt)):bt},{(<**82:>(Mbt2)):bt2},{(Mpli):pli}
That should work.
Thanks man... all good. ;)