just got Obi-100. Here is my sittings:
HardwareVersion 2.8
firmware updated to v 1.2.1
sp1(ITSP-A): GV (primary)
sp2(ITSP-B): sipgate
OBi expert ---> Setup Wizard ---> outbound settings (all default)
ITSP DigitMap: (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
Phone DigitMap: ([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
Phone OutboundCallRoute: {([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Service Providers: (all default)
ITSP-A digitmap: (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
ITSP-B digitmap: (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
What I want is when I dial (1)800,(1)888,(1)877 and 011xxxxxx, Obi100 can route the call to ITSP-B(sipgate). Other long distance (1)nxx-xxx-xxxx go to ITSP-A(GV).
do I only need to change ITSP-A digitmap and ITSP-B digitmap?
can I omit xx. as one pattern?
what is [^*]@@. ?
I am a newbie, please help. Thank you.
Leave the PHONE Port DigitMap and OutboundCallRoute at Default. Leave the PrimaryLine at SP1 Service.
Services Providers -> ITSP Profile A -> General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>xxxxxxx|<**2>18(00|88|77|66|55)xxxxxxx|
<**21>8(00|88|77|66|55)xxxxxxx|<**2>011xx.|(Mipd)|[^*]@@.'@'@@.)
Services Providers -> ITSP Profile B -> General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>xxxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
where aaa is your local area code.
7/10/11 digits -> SP1
011+ -> SP2
Toll Free -> SP2
I recommend removal of the xx. rules as I've done above.
[^*]@@. has been replaced with [^*]@@.'@'@@. as a better rule for SIP URI dialing from Speed Dials:
18005551212@tf.callwithus.com
The [^*] portion is a workaround for a bug in the OBi firmware. It can be removed if/when the bug is fixed.
I tested four conditions as <1>xxx-xxx-xxxx, and <1>800-xxx-xxxx, checked GV history and sipgate history, it worked perfectly! Thank you very much!
Hi,
every thing is working as planned. Now I activate e911 service on my sipgate account. How to set up digitmap to connect to 911 through sp2/sipgate?
Physical Interfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>):li},{911:sp2},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
That's quick! Thank you very much.