HI All, its query.
we have 2 location and we want to communicate interoffice and also we want to use the other location dialing from our location.
Obi will support PSTN line. like
In site A i will connect my PSTN with OBI110 and one more device in Site B OBI110 connected to my PBX trunk port. person from Site B Hunting the OBI110 Trunk and he will get the Site A dial tone.
Find the Attachment
is this possible to do in OBI
I believe this will work if you connect:
OBi PHONE Port -> PBX Trunk
and
OBi LINE Port -> PBX Extension
In the OBi's that are connected to PBX Extension:
Physical Interfaces -> LINE Port -> InboundCallRoute : {pp(ob200123456)}
where 200123456 is the OBiTALK number of the distant OBi connected to the PBX Trunk.
When the local PBX Extension is called, the distant PBX Trunk should see an incoming call.
BTW, you should only need a single OBi at each PBX. For each OBi:
OBi PHONE Port -> PBX Trunk
OBi LINE Port -> PBX Extension
Physical Interfaces -> LINE Port -> InboundCallRoute : {pp(ob200123456)}
where 200123456 is the opposite OBi's OBiTALK number.
When the local PBX Extension is called (ringing the OBi's LINE Port), the distant PBX Trunk should see an incoming call (from the OBi's PHONE Port).