I've had this obihai200 devices for about 4/5 years. I never used it. I tried to configure it when i first got it but was getting an issue with it not finding a network. I then had no use for it since i have a obi100 devices working fine. I got it because it did fax and I need to send faxes.
I tried to setup from time to time but got same issue and let it go but today i'm trying to be more adament about trying to resolve it.
I plug the obihai device into the same ethernet line that i plug my laptop into and know it works 100%. When i try to plug it into the obihai i get the flashing green light. From what I know, it's not able to obtain an IP Address.
I open up my router and try to see if i can find the device via the mac id and try to setup a DHCP but to no avail i can not find the device at all via the mac id.
I do a factory reset by using a paperclip. Then i do a *** 8 and it flashes off, turns red and turns back on but then it's blinking green still.
I try to manually setup an ip address via: 2. To enter IP address, dial *** 4, dial 1, dial IP address & #, dial 1 to save. IP Address 192.168.1.120 would be entered as: 1921681*120#
Is it definitely an OBi200, not an OBi202?
Are you trying with the same ethernet cable that works with your OBi100 or computer?
Examine the ethernet socket and check for broken or bent contacts.
Hello, you can search for it online. And if you want to know how to write bestessay (https://www.bestessays.com.au/) then I can help you out. Just let me know. I am always online and reply to you.
Can you try another ethernet cable? Perhaps the obi unit is not auto-negotiating properly. Is the obi plugged into your home router, or to a switch? Try one or the other, if possible. If you setup your pc and the obi unit both with a static ip (192.168.1.120 on the obi, 192.168.1.121 on pc for example), then you ought to be able to web into the obi from the pc.
I've had this obihai200 devices for about 4/5 years. I never used it. I tried to configure it when i first got it but was getting an issue with it not finding a network. I then had no use for it since i have a obi100 devices working fine. (https://playapkpro.com/download-gb-whatsapp-apk-latest/) I got it because it did fax and I need to send faxes.
I plug the obihai gadget into a similar ethernet line that I plug my PC into and realize it works 100 percent. At the point when I attempt to plug it into the obihai I receive the blazing approval. From what I know, it's not ready to acquire an IP Address.
You say that by connecting the obihai gadget to an ethernet you get a fast connection, then why do you get the conclusion that it is not ready to receive an IP address? Is there any logic in this?
Quote from: henrymosley on April 28, 2022, 01:11:16 AMYou say that by connecting the obihai gadget to an ethernet you get a fast connection, then why do you get the conclusion that it is not ready to receive an IP address? Is there any logic in this?
I think what billyroberts was trying to say in a very badly worded way is that he connects the OBi using a cable and router socket that works fine for his PC.
Why he and the original poster think their issues are anything to do with the Obitalk web portal is another mystery.
The big question is can you still get to the web interface on the device. If so I'd try manually flashing it with the new firmware (and if the first try doesn't work, try doing it again). If not then maybe try disconnecting the power for a couple of DAYS and then try the factory reset again; that actually worked once for me!
@jamesedger
1. It is almost 3 years since the OP made that one and only post.
2. The OP was quite specific that the OBi was not getting an IP address. Therefore it is pointless to suggest trying to update the firmware.
3. A URL in a sig is frequently a sign that the intent of the post is spam.
Quote from: RowanBraxton on January 04, 2020, 05:47:01 AMI've had this obihai200 devices for about 4/5 years. I never used it. I tried to configure it when i first got it but was getting an issue with it not finding a network. I then had no use for it since i have a obi100 devices working fine. I got it because it did fax and I need to send faxes.
I tried to setup from time to time but got same issue and let it go but today i'm trying to be more adament about trying to resolve it (https://playonlinecasinoaustralia.com/).
I plug the obihai device into the same ethernet line that i plug my laptop into and know it works 100%. When i try to plug it into the obihai i get the flashing green light. From what I know, it's not able to obtain an IP Address.
I open up my router and try to see if i can find the device via the mac id and try to setup a DHCP but to no avail i can not find the device at all via the mac id.
I do a factory reset by using a paperclip. Then i do a *** 8 and it flashes off, turns red and turns back on but then it's blinking green still.
I try to manually setup an ip address via: 2. To enter IP address, dial *** 4, dial 1, dial IP address & #, dial 1 to save. IP Address 192.168.1.120 would be entered as: 1921681*120#
You mentioned that connecting the Obihai gadget to an Ethernet connection provides a fast connection. However, despite the fast connection, the conclusion is drawn that it is not ready to receive an IP address. The logic behind this conclusion could be due to several reasons:
Configuration Issue: The Obihai gadget may require specific settings or configurations to obtain an IP address from the network. If these settings are not properly configured, the device may not be able to receive an IP address.
Network Compatibility: The network infrastructure may have certain restrictions or security measures that prevent the Obihai gadget from obtaining an IP address. This could be due to firewall settings or MAC address filtering, for example.
Hardware or Firmware Problem: There might be an issue with the device's hardware or firmware that prevents it from correctly negotiating an IP address with the network.
Network Congestion: In some cases, network congestion or DHCP server overload can lead to difficulties in obtaining an IP address promptly.
It's important to troubleshoot and investigate the specific reasons for the issue to determine why the Obihai gadget is not ready to receive an IP address, despite being connected to an Ethernet connection.
^^spammer
Do you want to try updating the firmware?
^^spammer