Good morning. I have a working 1022 device with firmware version 5.0.0 (Build: 2211). When I attempt to update to the current version 5.1.11 I am receiving the error "Firmware Update Failed. System is busy. Try again later" in the web gui.
I have tried defaulting / resetting the device and power cycling all with no effect.
I am looking for old firmware so I can see if stepping through some versions as apposed to going from 5.0.0 directly to 5.1.11 will solve the problem.
I have looked around the form but all the firmware links are 404ing now.
4858 is available from my posts in the topic at http://www.obitalk.com/forum/index.php?topic=16726.0
However I wouldn't count on it solving your problem.
Thanks @dregoff... but you were correct, 4858 results in same "System is busy, please try again later".
Thinking I am needing something much older.
Try using a different browser to connect to the phone's web interface.
Same result... note that I have many Obi1022 devices and was able to upgrade all but this one that is stuck on some old firmware.
5.0.4 (Build: 4003EX.1311) at https://web.archive.org/web/20210202162922/http://fw.obihai.com/OBiPhone-latest.fw?v=2 though I still think OBis have never needed incremental updating.
Same... I did find this thread.. https://www.obitalk.com/forum/index.php?topic=13290.20
Take a look at the last post. Going to see if I can get my hands on 5-0-0-2436
https://web.archive.org/web/20150311201937/http://fw.obihai.com/OBiPhone-latest.fw Supposed to be 2318 but says "5.0.0 (Build: 3223.1311)" inside
FIRMWARE UPDATE STARTED!!!!!!
YOU ARE A HERO!!!!
let me see step through some FW versions and see if I can get this current now!
For those running into the "System is busy. Try again later" error with the Obi1022 on build 2211 I was able to update to build 2318 using drgeoff's link above and then was able to update to 5312.
thanks again drgeoff!
Good to know that you succeeded. And I learned something today.