Text only | Text with Images

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: eddiey on March 16, 2011, 10:20:17 PM

Title: dialing on phone using SP2
Post by: eddiey on March 16, 2011, 10:20:17 PM
If SP1 is Google Voice (set as primary) and SP2 is voip.ms, how (or can) I use the "Phone" line to dial out using SP2?

Sometimes I may want to use voip.ms in case of call quality issues on GV...  Hope there is a * code to select...?
Title: Re: dialing on phone using SP2
Post by: QBZappy on March 16, 2011, 10:23:38 PM
eddiey,

Hi

dial **2 before the number you want to dial.
Title: Re: dialing on phone using SP2
Post by: eddiey on March 16, 2011, 10:27:41 PM
Perfect, that did the trick.  I noticed the callerID is still SP1 though, but the logs on the console show Sp2 was the dialout line.. Is this normal behavior?
Title: Re: dialing on phone using SP2
Post by: eddiey on March 16, 2011, 10:30:39 PM
Oops, nevermind.  It was my voip.ms callerid config set as my GV #.   :)

Everything works :D

Thanks!
Text only | Text with Images