Hi,
I've been trying to figure out how to send/receive a fax with my HP Officejet Pro using my Obi202. I currently have 2 lines:
1- GV - attached to standard Panasonic cordless phone line - Set up to Call and Receive with Obi202 line 1 only
2- GV - attached to HP Officejet fax/printer/scanner - Set up to Call and Receive with Obi202 line 2 only
I saw this post from around a year ago:
http://www.obitalk.com/forum/index.php?topic=16917.0"I have three different GV numbers working on my 202. Two for voice calls and one for FAX. See if this works for you:
In ObiTalk::
Set up both voice numbers on port 1.
Set one of those numbers as primary incoming and outgoing on port 1.
Set the other voice number as incoming only on port 1.
For both the two numbers leave both port 2 boxes unchecked.
Set up your fax number on port 2.
Set the fax number as primary incoming and outgoing on port 2 (leave both port 1 boxes unchecked).
Plug the phone line for your home phone into port 1.
Connect the phone line from your Canon multi into port 2."
So basically, I want to set up things the same but I'm unable to use the fax yet. The Printer/Fax will ring if I call the associated GV number with a phone. The fax machine isn't able to send or receive at this time. When I send a fax I get the message "No answer" on a line that is confirmed active and able to accept faxes. When I try to receive a fax it fails every time without any rings on my machine. I have the HP Digital Fax to email set up since the entire purpose of this was to get rid of paying for a fax line as well as to stop wasting so much fax paper on junk.
I saw this other post:
http://www.obitalk.com/forum/index.php?topic=17418.0So I tried these settings but it made no difference so I reset everything back to default. I did change the fax speed to 9600 (lowest available) as Ive read that should help.
Anyways if you have any advice it would be greatly appreciated. Thanks in advance!!