News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

triggering a callback without Obi answering the call

Started by lk96, January 08, 2012, 08:29:49 PM

Previous topic - Next topic

pc44

Quote from: Shammi on July 01, 2012, 09:39:37 AMHi there,
I am not sure how to find my IP address. Is this obihai's IP address that we get by dialing ***1, the public IP address that we can find like, by clicking here http://whatismyipaddress.com/
Thanks

Hi Shammi,

I'm assuming you are using a OBI100 or OBI110.  When you press ***1, this tells you your OBI's IP Address on your Local (private) Network; this is not your public IP.  To determine your Public IP Address, you can use the website that you mentioned above.

I'm not sure which one you are trying to determine, but those are the methods to determine your OBI's local address or your public address.

Does this help?
pc44

lk96


Quote from: Shammi on July 01, 2012, 09:39:37 AM

Hi there,
I am not sure how to find my IP address. Is this obihai's IP address that we get by dialing ***1, the public IP address that we can find like, by clicking here http://whatismyipaddress.com/
Thanks

When it comes to Voxbeam, your public IP address (ie the one returned by the http://whatismyipaddress.com
service) is needed. They seem to use it to validate the end points that Voxbeams SIP trunks can be used at.

You can also find your public IP address by looking at your router WAN configuration or information page.

L.