Hi, First Thanks in advance for reply to this forum.
I have a OBI 202 and I want to set up Voxbeam for SP3.
I use following link to configure voxbeam.
http://www.obitalk.com/forum/index.php?topic=2898.0Only difference I see is :
Physical Interfaces -> PHONE Port -> DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|
**8(Mli)|**9(Mpp)|(Mpli))
=======================
On 202 is as following:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**4(Msp4)|**9(Mpp)|(Mpli))
=======================
Physical Interfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},
{(<**3:>(Mvg3)):vg3},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
==============================
On my OBI 202 is
{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph2},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}
===============================
It was not in instrucation but I modified CallReturnDigitalMap as following:
{pli:(xx.)},{sp1:(<**1>xx.)},{sp2:(<**2>xx.)},{vg3:(<**3>xx.)},{sp4:(<**4>xx.)},{bt:(<**8>xx.)},{bt2:(<**82>xx.)},{pp:(<**9>xx.)}
My Problem is that I am trying to call India and I dialed **3 91 XXX XXX XXXX but i get error message that "There is no call route available to complete your call".
What am I doing wrong? Can someone help with this?
Thanks,
Raj