so as of this point i unplugged the telco port, and I'm doing this remotely as I don't have access to plug it in again right now, but this is what I see:
Digit Map (when none of the boxes on the right are checked)
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**8(Mbt)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**8(Mli)|**9(Mpp)|(Mpli))
OutboundCallRoute: (when none of the boxes on the right are checked)
{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph2},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}
side note, the reason why the telco port was unplugged is because when incoming calls came to it, it ringed the obi google voice line too which was a loud racket. Is there a way to turn that off?
Thank you so much for your help!!!