News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Unable to connect

Started by dkjfhsdjhfkjdshfkjsd, June 21, 2015, 05:35:14 AM

Previous topic - Next topic

dkjfhsdjhfkjdshfkjsd

My OBi202 is connected to a TP-Link
router(Model No. TL-WDR3600). The Ethernet port light
on the router does not come on when I connect the
router and the OBi202. This comes on when I connect
my laptop to the router. Don't know if that matters,
just thought I'd mention something I noticed. OBi202
is not listed in the DHCP client table of the router.
So I cannot determine the IP address of the device to
open ports or connect to the device from my laptop.
The light on the device is alternating between
red/green and off. Dialing the numbers as suggested
by your website does not do anything.


dkjfhsdjhfkjdshfkjsd

Thank you for the link. The page suggests that I update the OBi's firmware by connecting to the OBi's IP address. My problem is I can't get the IP address of the OBi. The device is not listed in my router's DHCP table.

dkjfhsdjhfkjdshfkjsd

I just saw on another post that if the phone connected to the OBi does not have a dial tone then the unit may be defective. Can someone please confirm that? I do not get a dial tone.

dircom

 verify that your phone is plugged into Phone 1, or Phone 2, on the back of your 202

if you have another power supply, that is same volts / amps & polarity, try another power supply