Re-link after factory reset

[a8ree]

I was having some issues with connectivity to the local network and chose to do a factory reset.

I now able back able to access the local webpage of the Obi110.

I was hoping that it might have re-downloaded my web config but it hasn't. I have tried to 'add device' but it won't work - probably because the device with the same hardware ID, and the configuration I wish to use is already listed.

How can I re-link this?

Thanks

[azrobert]

Try enabling OBiTalk Auto Provisioning.

Log directly into the OBi using the local interface.
Key the IP address of the OBi into a Web Browser.
Hit Enter
The UserID and default Password are both "admin".

Provisioning is found here:
System Management -> Auto Provisioning

Under OBiTalk Provisioning change
Method: System Start

If this works then change the Method to: Periodically
Periodically is the default after you add a device to OBiTalk.

[a8ree]

Fantastic, that did the trick. Thanks!