December 14, 2017, 10:42:14 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Dialing Delay on Outgoing Calls...help!  (Read 14124 times)
Northern.Bob
Jr. Member
**
Posts: 28


« on: February 03, 2011, 01:11:26 pm »

I should know this but I don't.  Embarrassed Coming from an ata 3102 I find OBi's dialing codes to be very opaque.

The problem is, there is around a 10 sec. delay between pressing the last digit and the unit actually dialing the number. Yes, I know I can press # to get it to dial faster but I'd want to change the dialing plan to do this automatically.

Andy help on where to change this behavior would be appreciated.

Bob M.
Logged
QBZappy
Hero Member & Beta Tester
*****
Posts: 2322



« Reply #1 on: February 03, 2011, 01:47:50 pm »

Put this in the outbound dial plan of you route.


I believe this is one way to do it:
xx.<#> Adds a # to the end of any number with 1 or more digits (P98 of the manual). This will dial immediately. Insert it into your own dial plan.

I think this is another way:
S, S0, S1, S2, S9 - Digit timer of 0, 1, 2, ,9 seconds respectively
This can be configured to delay with the seconds you choose

The manual explains better.
Logged

Owner of the 1st OBi110/100 units in service in Canada & South America. 1st OBi202 on my street. 1st OBi1032 in Montreal.
Northern.Bob
Jr. Member
**
Posts: 28


« Reply #2 on: February 03, 2011, 03:34:47 pm »

Thanks. I've tried that and it helped a bit tho there is still a 4-5 second delay. I guess that's impossible to avoid as it's likely the OBi parsing the rules before dialing.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC