Newbie, please help with digitmap

[Bogolisk]

Hi

I just got my obi200 for a couple of weeks and have troubles with outbound routing.

phone digitmap:
(**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**7(Mvg7)|(Mpli)|(Msp2))

Phone outbound route:
{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**7:>(Mvg7)):vg7},{(Mpli):pli},{(Msp2):sp2}

Sp3 map:
(10x)

This works fine, I can dial **3101, and my cell would ring.
However, if I changed sp3 map to:
(<:10>x)
so I can just dial: **31

But obi keeps complaining that there's no possible route!!!

I just can't figure out why....

Please help a newbie!

[ianobi]

Your rule is correct, but is only half the answer. What you need is this:

(<10>x|10x)

You don't need the leading ":" in this situation although it does no harm.

<10>x  prepends 10 to any single digit dialled after the **3.
10x  allows the OBi to route the three-digit number created by <10>x to sp3.

It's a two-stage process, the first post here explains it in depth!

http://www.obitalk.com/forum/index.php?topic=513.msg3001#msg3001

[Bogolisk]

thank you, I'll go read that post