News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

2 GV #'s on OBI 200

Started by Dbrown25, April 21, 2016, 08:27:55 AM

Previous topic - Next topic

Dbrown25

Hello,

I have a OBI200 and a 2 line phone that I only need to make outgoing calls on from the second line. I don't need it to ring or receive incoming calls or bridge up   a 3 way, just strictly to dial out on.

Example: Line 1 caller on hold while dialing out to another party on line 2

Is this possible with my current config?

Everything is running perfectly.

Thanks!

D






N7AS

If your outgoing line is on SP2 then:

Voice Services > SP2 Service > X_InboundCallRoute  set to {}
Your Line 2 will not ring.
Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.

drgeoff

An OBi200 has a single phone port which is wired for a 1-line phone. You cannot use the 2-line functionality of a 2-line phone.

You can use a single line of the phone to put a call on hold and make another call. Usually by hook flashing. Search for 'Handle Hook Flash Locally' in http://www.obihai.com/OBiDeviceAdminGuide

N7AS

Quote from: drgeoff on April 21, 2016, 01:46:17 PM
An OBi200 has a single phone port which is wired for a 1-line phone. You cannot use the 2-line functionality of a 2-line phone.

You can use a single line of the phone to put a call on hold and make another call. Usually by hook flashing. Search for 'Handle Hook Flash Locally' in http://www.obihai.com/OBiDeviceAdminGuide

What was I thinking? Well at least SP2 will not ring.

Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.

Lavarock7

#4
Quote from: N7AS on April 21, 2016, 02:00:05 PM
Quote from: drgeoff on April 21, 2016, 01:46:17 PM
An OBi200 has a single phone port which is wired for a 1-line phone. You cannot use the 2-line functionality of a 2-line phone.

You can use a single line of the phone to put a call on hold and make another call. Usually by hook flashing. Search for 'Handle Hook Flash Locally' in http://www.obihai.com/OBiDeviceAdminGuide

What was I thinking? Well at least SP2 will not ring.

In fact SP86 will also not ring. However, if you want 86 to initiate a call, he has to remove his shoe...



My websites: Kona Coffee: http://itskona.com and Web Hosting: http://planetaloha.info<br />A simplified Voip explanation: http://voip.planet-aloha.com

dave86

the another easy way to get this done is check the box "DoNotDisturbEnable" under SP2 Service in expert OBI configuration

SteveInWA

None of those OBi settings are necessary.  All that needs to be done is to remove the check mark to the left of Google Chat, on the Google Voice settings page for the account that you don't want to receive inbound calls.  This makes it an outbound-only account.

dave86

Thank you, that is really a clean way