December 16, 2017, 04:30:19 pm *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Can I transfer a call from Obi's ph. phone 1 to ph. port 2?  (Read 3885 times)
2ooarmz
Jr. Member
**
Posts: 31



« on: November 04, 2016, 07:34:39 pm »

Earlier today I was on a call, using the phone that's connected Obi's ph. port 1; but then I wanted to talk to them using the other phone --  that phone is connected to Obi's phone port 2.   But when I picked up the other phone, all I got was a dial tone.

So, how can I (or can I) transfer a call that uses ph. port 1 over to the phone that uses phone port 2?
Oh, both ports are for the same phone number - our home phone number.

Our setup (the relevant part for this question):
Port 1
♦ Uniden phone (the base unit).
Wall jack > modem > router > Obihai > the phone jack splitter > Uniden phone

====================

Port 2  (The phone company added a separate phone jack to the main jack so that we could use the house wiring and the internet simultaneously.)

■ The extra phone
The house wiring phone jack (wall jack) > phone

Any help/suggestions?
Thanks!


* Obihai etc setup.JPG (196.58 KB, 1280x758 - viewed 244 times.)
Logged
azrobert
Hero Member & Beta Tester
*****
Posts: 3204


« Reply #1 on: November 04, 2016, 09:43:58 pm »

Dial # from Phone2. You will barge-in to the call on Phone1. Hang up Phone1.
Logged
2ooarmz
Jr. Member
**
Posts: 31



« Reply #2 on: November 06, 2016, 04:51:36 pm »

Yes, doing a flash hook, then #, did the trick - Thank you! Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC