Started by rmyers1968, December 15, 2016, 02:08:32 PM
Quote from: rmyers1968 on December 19, 2016, 12:15:25 PMTHANKS @azrobertI just tried adding this to the STAR CODES*01, Modem Call, set($Noji1,200),set($Noec1,1),set($Cdm1,3)Dialed out with *01 and low and behold it worked...So my new question is, how do I configure the OBI202 to have it:1. Disable Jitter Buffer Adjustment, and use a fixed jitter buffer length of 200 ms2. Disable Echo Canceller3. Use only G711u and G711a codecFor all inbound and outbound callsThat way I wont have to use the *01 code for faxing out, and it also makes sure that those parameters are set when receiving a call, something I would not be able to do otherwise...Sorry to be so demanding, just trying to get my OBI202 to work as well as my OBI100 for faxing on google voice...Thanks again azrobert, I would have never found the thread you gave me, since it appeasr to be more for MODEM/TERMINAL problems as opposed to FAX machine problem... My guess is this parameter is not required if both sides support T.38 FAXing, but I have been having problems and my FAX does support T.38. I guess my recipient(s) did not support it, which caused my failures...