Pause in speed dial:
I think this has to be done using a programmable key. I cannot remember where I found this!
OBi10xx series speed dial with pauses etc:
Number = {speed-dial-number};send={digits}
{digits} = one or more of the following codes (case-sensitive):
0-9,*,#,a,b,c,d = send corresponding dtmf (100 ms on+off)
S = Delay for 3s
s = Delay for 1s
A = Wait for Answer (or otherwise start sending on early media, if available,
or when call is answered, whichever first)
U = Prompt user on phone screen to dial any number of digits manually, then
click "OK" to continue sending remaining DTMF's
"prompt" = (Only allowed right after a U) An optional prompt to
show on screen to prompt user to enter digits; default is
"Press OK to continue".
Here is an example:
{digits} = ASSss1234U"Enter Password"s4567U"sSEnter a code"123#
Means:
Wait for callee to answer, wait 8s, send 1234,
then prompt user to "Enter Password"
When user click OK, wait 1s, then send 4567.
Prompt user to "Enter a code", then send 123#
I set up a key as a speed dial like so:
12345678901;send=ASSss1234U"Enter Password"s4567U"sSEnter a code"123#
Works as advertised.