Selective Do Not Disturb OBI 1062

[Radioman991]

Curious if this is possible, or if it should be a feature request.

I would like to SELECTIVELY set Do Not Disturb for the lines keys I have in my 1062.   While I know this can be done in the GV webUI, that doesn't help me when I am on the road.

Currently, I set the phone to DND when I am gone, as the fam doesn't need it to ring and disturb them.  However, I DO have some lines on the phone that they would possibly use...such as our inbound home line, and I would like that to ring this phone.  If I set DND in the WebUI of GV, it also affects my cell..so that's  no-go,

Thanks,

[azrobert]

You can use OBi Expert to selectively set DND.

Voice Services -> SPx Service -> DoNotDisturbEnable: checked

[azrobert]

Another option is using OBi Expert to modify the Star Codes:

*78, Do Not Disturb, set(sp1($Dnd),1), set(sp2($Dnd),1)
*79, Disable DND, set(sp1($Dnd),0), set(sp2($Dnd),0)

Add another Set command for each additional trunk.

[Radioman991]

Perfect. Option 2 exactly what i needed.  Thank you.  Too bad the display doesn't show DND, but I will get by.