December 10, 2017, 11:47:52 pm *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: No IP after power cycle or power failure...  (Read 2486 times)
yadda
Newbie
*
Posts: 3


« on: September 06, 2017, 10:27:56 am »

My Firewall/Router is set to expressly power cycle once a week.
 
Even though I have set a static ip, subnet and dns servers on my device, my Obi202 still requires a reboot after the router power cycles. If I check the 202's network status, it returns a 0 IP status.

This also happens after a power failure.

From what I've read so far, setting a static IP is supposed to remedy this issue.

Is anyone else experiencing this or have  idea why this is happening?
« Last Edit: September 06, 2017, 10:29:49 am by yadda » Logged
drgeoff
Hero Member & Beta Tester
*****
Posts: 2695


« Reply #1 on: September 06, 2017, 11:00:35 am »

Are you 100% certain that your OBi is configured to static network parameters?
Logged
yadda
Newbie
*
Posts: 3


« Reply #2 on: September 10, 2017, 08:16:59 am »

@drgeoff  Yes, I'm positive...

I checked both WAN settings on obitalk.com (advanced config) and locally just to be sure (see attached pics),
static IP is indeed enabled in both instances.
 


* Screen Shot 2017-09-10 at 11.13.04 AM.png (228.49 KB, 1316x972 - viewed 37 times.)

* Screen Shot 2017-09-10 at 11.11.28 AM.png (256.95 KB, 1538x1064 - viewed 31 times.)
« Last Edit: September 10, 2017, 08:34:06 am by yadda » Logged
Lavarock7
Sr. Member
****
Posts: 480



« Reply #3 on: September 10, 2017, 09:18:04 am »

I noticed the IP address was in the 100-255 range (118). Is that also the range for DHCP?

Do you see anything funny in the router logs like a PC or media device trying to grab that IP address?

When I do router setups I leave anything over 100 for DHCP and hardcode my IP addresses down in the 2-20 range.

Side note: While not your case, some people who move items from network to network assign the MAC address to a DHCP IP address on each network router. The equipment says it wants a DHCP address, the router looks at the MAC address and assigns the same IP each time.
Logged

My websites: Kona Coffee: http://ItsKona.Com and Web Hosting: http://PlanetAloha.Info
A simplified Voip explanation: http://voip.planet-aloha.com
yadda
Newbie
*
Posts: 3


« Reply #4 on: September 10, 2017, 09:29:31 am »

@Lavarock7

Thanks for your suggestions!

Yes, 118 is within my router's DHCP assignment range: 2-254
I do have mac address reservation set for my obi202 and can see no IP conflicts with any other device on my local network. FWIW, every device on my network has mac/ip reservation set.

I'm totally baffled.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC