First thanks azrober, I will keep your suggestion in mind if Simonics doesn't work out.
Here is what I setup, if someone sees I need to do something different please let me know.
OBi 200 SP3: Generic Service Provider
Service Provider Proxy Server:
gvgw.simonics.comService Provider Proxy Server Port: 5060
Outbound Proxy Server:
gvgw.simonics.comOutbound Proxy Server Port: 5060
Username: GVxxxxxxxxxxx
Password: (generated by Simonics)
URI: (left blank)
In addition I followed these instructions:
This post describes how to set up your Obi to take advantage of GVGW server redundancy.Thanks to user CarlM for this write-up!
The starting point for these instructions is GVGW already configured under Service Providers->ITSP Profile X and working.
Obihai Config Instructions
Under Service Providers->ITSP Profile X->SIP:
1. Set all four of the following parameters to
gvgw.simonics.com :
ProxyServer (this should have been set already)
RegistrarServer
UserAgentDomain
OutboundProxy
2. Enable X_ProxyServerRedundancy
3. Enable X_DnsSrvAutoPrefix
4. Submit the changes
5. Reboot your Obi
That's it!
Note:
It is neither necessary nor desirable to enable X_SecondaryRegistration. In the case of GVGW, registering with one server registers you with all servers.
Just so it's clear I have an OBiLine attached to the OBi200 that handles the local PSTN line and that is the default line when the receiver is lifted. SP1 has the CallCentric account, SP2 has my wifes GV account and SP3 has my GV account. As of now I have just setup SP3 using Simonics to see how that works, if it does I will setup my wifes account on Simonics.
Anyone see any problems?