November 18, 2018, 06:39:03 am *
Welcome, Guest. Please login or register.
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
Author Topic: OBI202 - Provisioning tool to obtain SIPdefault.cnf.xml file  (Read 811 times)
Posts: 2

« on: November 27, 2017, 11:47:09 am »

Greetings all,

I recently purchased OBI202 device for my home office with the intent on using an existing ip phone. I seem be running into a problem when I run the provisioning tool. As i understand, My ip phone (7942G)requires a sip MACxxxxx.cnf.xml file to complete the phone registration process. In reviewing several other forums, it was suggested I contact obihai since I will be using the Obihai202 with GV.

The steps referenced on the provisioning tool manual requires the following:

1. Install Tftp Server - I have

2. Create a backup of the target device at: System Management / Device update / Backup Configuration 'use obi Version' must be checked is indicated in the manual.
If anyone can help identify where I need to go to initiate the back up configuration, I think this will allow me  to generate a SIP default.cnf .xml file
3. Run ObiProv
4. Select file/Output $BM Files

Any helpful suggestions would certainly be appreciated.

« Last Edit: November 27, 2017, 11:58:13 am by wadedan » Logged
Hero Member & Beta Tester
Posts: 3782

« Reply #1 on: November 29, 2017, 01:31:15 pm »

At least one of us is utterly confused!

The file generated by that menu option on an OBi contains all the configuration settings (except passwords) of that OBi device.  I don't see how that file can be used by any other non-OBi device.

If your only requirement for the 202 is to use GoogleVoice on your SIP IP phone, you might consider not using the 202 at all and instead use the Simonics GV Gateway.
« Last Edit: November 29, 2017, 01:33:00 pm by drgeoff » Logged
Pages: [1]
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC