December 16, 2017, 10:15:26 pm *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Add caller to X_BlockedCallers list  (Read 282 times)
GPz1100
Full Member
***
Posts: 121


« on: November 30, 2017, 09:04:35 pm »

Is there some * code that will automatically add a caller (or last caller) to the X_BlockedCallers list?

Some how a particular number got added to this block list without actually manually entering it.  I looked through the admin guide for such a code but couldn't find anything that matches this behavior.

Thoughts?
Logged
GPz1100
Full Member
***
Posts: 121


« Reply #1 on: December 01, 2017, 10:27:16 am »

Found the issue.

Apparently *86 is defined as block last caller by default in the obi star codes.  It's possible this code got dialed to check voice mail.

This post offers a solution on clearing the block listing using just a star code https://www.dslreports.com/forum/r30641411- .

What's interesting is the obi admin guide makes no mention of the block code but rather cancel repeat dial for *86 .  Talk about a disconnect.  This probably got changed in some firmware update but never documented.  All the more reason why change logs are important!

A different obi, which was recently factory reset (following the 5757 firmware update) also shows block last caller for *86.

I changed *86 to *8686.  Left the *99 in there too, just in case.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC