Started by Sandia505, April 11, 2021, 03:28:56 PM
Quote from: Sandia505 on April 11, 2021, 03:28:56 PMI currently use a 200 unit with 2 sp's and wish to move to a 202 unit to have the second SP appear as a separate line since I already have the second line with google voice anyway.Are there any drawbacks to this configuration and how easy will it be to retire the old 200 and move to the 202?Thanks,Dan
Quote from: drgeoff on April 11, 2021, 04:20:50 PMNo drawbacks except:............2. There is no simple way to transfer the 200's configuration to the 202. You will have to configure the 202 from scratch.
Quote from: Sandia505 on April 14, 2021, 06:46:12 PMI managed to add the new device by logging into my Obitalk portal for the old 200 unit, dialing the access code of **5 3415. this added it but now I need to know how to tranfer to the new unit, I tried the link feature but that did nothing. I also need to figure out how to delete the retired 100 unit that still shows up, under my obi devices I see both units my old unit has SP1 and SP2 with the 2 numbers I want to move to the new unit, the new OBI202 shows SP1 and SP2 showing google voice but no numbers. I would past a screen dump but there is no option to allow me to do that so where do I go from here? thanks
Quote from: Sandia505 on April 15, 2021, 02:14:41 PMI went ahead and added the 2 numbers to SP1 and SP2 to the new unit. I have unplugged it but not yet tried to delete the Obi200 yet.I did try to delete the old 100 unit but I do not have that delete button you pointed out on your post. I went through all the menus but cant find anything to allow me to delete it. I attached a screen dump hopefully it will post up. Once I think the new unit is up to speed I will plug the old one back in and grab the settings off of it. I do know I had made some ringer changes that will need to be mapped over once that is done I will retire and delete the old 200. Thanks again for all your help.Dan