My telephone configuration is fairly simple: an Obi202 with a legacy residential line (Anveo), a business line (Google Voice), and a cell phone (Ting/Sprint). The Google Voice line is configured to forward to the cell phone and the Obi202.
Since recently receiving an automated firmware update (3.2.2 build 5859EX), calls to the Google Voice number can be answered on the Obi ATA but do not forward calls from SP2 to my cell phone. If not answered from the analog phones wired into the Obi202, calls to my Google Voice number end up going to Google Voice Mail.
From the forums, I tried deleting and re-installing the cell forwarding number in legacy GV, and the cell number now appears under the Obi device (but only in legacy GV > Settings). But calls to the Google Voice number still do not forward to my cell phone.
Here is what I have configured and tested so far: In ObiTalk, SP1 status is 'Registered' by Anveo and SP2 status is 'Connected' to Google Voice. My test calls are handled as follows:
Calls received by the Obi202:
- Calls into the SP1 number (Anveo) and SP2 number (Google Voice) appear to ring, connect, and can be terminated properly.
- Calls into SP2 (Google Voice) ring on phones connected to the Obi202 but are not forwarded to my cell phone (or at least the cell phone does not ring).
Calls initiated from analog phones connected to the Obi:
- Calls initiated from the Obi to outside telephone numbers connect properly.
- Calls initiated from analog phones connected to SIP1 (Anveo) and SP2 (Google Voice) on the Obi 202 dialed directly to my cell phone rings the cell phone as expected.
So it appears that Google Voice forwarding to the cell phone is the functionality that is not working for me. This is illustrated in the accompanying diagram.
Any suggestions?