Started by nexus415, May 24, 2018, 09:49:03 PM
Quote from: nexus415 on May 25, 2018, 07:10:28 PMIn the polycom setup I added 127.0.0.1 as the SIP Outbpund Proxy, with 5060 as the port. Is that correct? I now can dial a number. However when I dial I always get a busy tone.Unrelated, you reference "OBi200" in all instructions for UN and PW. Should I use OBi200 or OBi202 given I have a OBi202?
Quote from: dogwood on September 03, 2018, 02:26:47 PMThanks for the reply. I was talking about the link in azroberts post which has a complete example. See:http://www.obitalk.com/forum/index.php?topic=12492.0I do have it working with this setup, Yealink > Obi202 > Anveo.com. When I try to use the Polycom VVX 500 it actually works for inbound and outbound calls but it won't register.
Quote from: dogwood on September 03, 2018, 02:44:34 PMIt seems that you like to argue and correct people. When you click on the link it takes you to this page. SOLVED OBI200 and Cisco SPA303.I never said anything about azrobert and I bet he's a nice and smart guy. The SPA303 is a Cisco phone and it apparently works just like the Yealink does. I tried the exact same setup from the Cisco SPA303 post and it didn't register.I'm done with this thread and the snarky replies...