GV to PSTN

[jerome]

Hello, I just upgrade from Obi110 to Obi212

Everything work from the OBI212 itself,

what it doesn't work is from my cell, I call the GV to the PSTN and I receive a voice tell me that there is no call route available.


Dial GV#,2,**8numbertodial#
eg: xxxxxx,2,**8nnnnnnnn#

Thank you
Jerome

[drgeoff]

Hello, I just upgrade from Obi110 to Obi212

Everything work from the OBI212 itself,

what it doesn't work is from my cell, I call the GV to the PSTN and I receive a voice tell me that there is no call route available.


Dial GV#,2,**8numbertodial#
eg: xxxxxx,2,**8nnnnnnnn#

Thank you
Jerome

Is the AA's OutboundCallRoute appropriately configured to route **8 prefixed numbers to the Li port?

[jerome]

This is what I have on OutboundCallRoute of AA:

{([1-9]x?*(Mpli)):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Thank you
Jerome

[drgeoff]

This is what I have on OutboundCallRoute of AA:

{([1-9]x?*(Mpli)):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Thank you
Jerome

That is routeing **8 calls to Bluetooth.

**8 is correct for the OBi110.  I don't have a 212 and haven't seen documentation for one but I assume that what you posted, which shows **70 routed to the LINE port, is the 212's default.  So try entering **70 instead of **8 when you dial a number at the AA's prompt.

Or change the AA's PrimaryLine to Li and you won't need any ** prefix for the AA to call out on the PSTN line.