On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
Started by Sam61n2, July 06, 2018, 10:00:56 PM
Quote from: SteveInUS on July 07, 2018, 11:31:19 AMOn all my 4 OBi200's with GoogleVoice3.2.2 (Build: 5859EX) - Works fine, no audio issues. 3.2.2 (Build: 5897EX) - Does not work - I do not get dial tone. 3.2.2 (Build: 5898EX) - Does not work - I do not get dial tone. I reverted back to 3.2.2 (Build: 5859EX) but they keep updating it back to 3.2.2 (Build: 5898EX)not sure why obihai/polycom auto deploys untested firmware and causes us pain. even with new acquisition the trend has not changed.
Quote from: drgeoff on July 07, 2018, 01:29:09 AMA powered OBi should always give dial tone. It doesn't need configuration to do that. It doesn't even need a network connection to give dial tone.No dial tone usually means a hardware failure, usually of the phone cord or phone itself but sometimes the OBi's phone port circuitry.
QuoteI don't think it was hardware failure, as reverting to the 3.2.2 5859ex firmware as it returned my OBi200 to working fine again. I did try factory resetting up via OBiTalk, and it worked fine with latest firmware, till I use my original dial plan from pro essay typer tools and Call and Ring detection for Australia, when once again it failed to have dial tone, or detect lifting the phone off hook. Reverting once again to 3.2.2 5859ex fixed it again, I will leave it there for now, thanks.
Quote from: DanoGeorge on April 21, 2019, 10:31:04 PMI tried to downgrade to 3.2.2 5859. But that didn't solve the issue at all.
Quote from: VonRueden on February 02, 2021, 08:02:38 PMI'll be sure to keep an eye on this thread. Looking for the same issue. Bumped into your thread. Thanks for creating it. Looking forward for solution.www.myindigocard.com